RIDE-ON SCRUBBER DRYER

The ride-on scrubber dryer helps reduce labor costs as a single machine can replace 3 to 5 manual cleaning workers, significantly saving operational expenses.

Description
Instructions

The ride-on scrubber dryer enhances cleaning speed with its ability to cover large areas much faster than manual methods. Utilizing water- and chemical-saving technology, it minimizes environmental impact and ensures safety. The machine elevates cleaning quality through its scrubbing and water-extraction system, leaving floors spotless and dry immediately. Additionally, it reduces the risk of slipping due to residual water on the floor after cleaning.

Product Information

Integrated scrubbing and water extraction system: Keeps surfaces dry right after cleaning.
High capacity and fast cleaning performance: Saves time and labor costs.
Comfortable ride-on design: User-friendly control panel for flexible operation.
Durable motor: Saves energy and water, environmentally friendly.

Technical Specifications

Clean water tank capacity: 70 - 120 liters (depending on the model).
Dirty water tank capacity: 75 - 130 liters.
Cleaning width: 700 - 1,200 mm, suitable for various areas.

Before starting the machine, spend a few minutes checking the overall condition to ensure everything is ready:

Power source/Battery: check the battery charge level or power connection to avoid sudden shutdowns during operation.
Clean water tank: fill with clean water and mix with the recommended amount of cleaning chemicals.
Wastewater tank: empty if full to prevent overflow during use.
Brush/Pad: ensure the appropriate type is installed for the floor surface to be cleaned.
Squeegee: check elasticity, and replace if damaged to ensure efficient wastewater suction.
Wheels & movement system: ensure no obstructions or damages that could affect operation.

Cleaning process using the ride-on scrubber dryer:

Step 1: Start the machine

Turn the key or press the power button to turn on the machine.
Check the control panel; if any warning lights are on, inspect before use.

Step 2: Adjust cleaning settings

Movement speed: adjust according to floor area and dirt level.
Brush rotation speed: set appropriate RPM based on floor type and dirt intensity.
Water & chemical flow: avoid excessive chemical use to prevent floor damage and reduce costs.

Step 3: Begin scrubbing

Drive the machine in a straight path, moving slowly to ensure thorough cleaning.
Maintain a safe distance from walls, furniture, or other objects to prevent collisions.
For stubborn stains, increase brush speed or water pressure for better results.

Step 4: Simultaneous wastewater suction system operation

As the brush rotates, the suction system immediately dries the floor.
Regularly check the wastewater tank and empty it if full to maintain cleaning efficiency.

Step 5: Handover the cleaned area to the Customer

Ensure the floor is dry and clean before handover.
Provide recommendations for floor maintenance to sustain cleanliness.

Step 6: Turn off and clean the machine

Turn off the power and wait for the machine to stop completely before leaving.
Empty the wastewater tank and clean it to prevent odors or residue buildup.
Clean the brush/pad to ensure smooth operation for the next use.
Inspect the squeegee for wear or damage and replace if necessary.
Recharge the battery if the machine runs on battery power to ensure readiness for the next use.

Step 7: Store the machine properly

Place the machine in a dry, well-ventilated area, away from high temperatures or moisture.
Do not block pathways or obstruct other equipment with the machine.